Manufacturer: Zev TechnologiesWeight: 3OZ. The new ZEV Technologies SSR (Single Stage Rifle) Trigger is designed to bridge the gap between the multitude of two stage triggers intended for duty use, and single stage competition triggers.
The ZEV SSR Trigger ships with two hammer springs allowing for a 5lb to 5.5lb trigger pull weight or a 3lb to 3.5lb trigger pull weight depending on which hammer spring is used.
Each unit ships with two hammer springs allowing for a 5lb to 5.5lb trigger pull weight or a 3lb to 3.5lb trigger pull weight depending on which hammer spring is used.
The trigger bow has been extended for a better user interface allowing the pad of the finger to easily find its natural position when firing. Get the most out of your duty or sporting rifle with the enhanced features of the ZEV SSR Trigger.
• Easy User Install Providing A Crisp Single Stage Trigger Break
• Adjustable to Most Lower Receivers for Sear Engagement and Over Travel
• Adjustable Reset For User Preference • Detent Retained Adjustment Screws
• Durable PVD TiCN, Copper Coating • 3.5lb or 5.5lb Trigger Pull Depending on Hammer Spring Used
• Extended Trigger Pad
The installation instructions can be fo found HERE. What they don't tell you in the Instructions is that the locking groove on the trigger pin goes on the left. When installing the Hammer Pin Cock the Hammer first or you will never get it in and back ou ALL the adjustment screws before installing the trigger unit and follow the instructions for setting the three screws. DO not use your old trigger pins but use the ones provided as they have special grooves .