OR3GUN™ Recoil Pad Spacer Kit Mossberg 930/935

OR3GUN™ Recoil Pad Spacer Kit 930/935

For instance, while stacking the cast shim, an OEM .250" drop and an OEM .125" rise would in theory yield a .125" drop with cast adjustment, the stack of polymer shims would be too thick to allow the receiver's pin to engage the stock. This shim stack would also increase the shotgun's Length of Pull.

If you are one of those that would benefit from a longer Length of Pull, our Recoil Pad Spacer (RPS) offers a number of features. Each of these 6061 alloy spacers adds 0.375" to your LOP and 3.5 oz of weight to better balance your shotgun. 

Up to 3 RPS plates can be stacked and secured with the included bolt and nylon locknut. Alternately, the bolt and nut can be used to secure a stack of 3/4" fender washers for additional weight. More than one RPS will require that longer recoil pad screws be sourced from a local hardware store.

The complete process for configuring these components will be detailed soon over a series of 930/935 fitment videos on our YouTube channel. 

The CDA plate, RPS plate, shims and short stock nut spacer are machined entirely from 6061 T6 aluminum.