Springfield Armoury M1 Carbine made by GM - General Motors. Serial 736696 woth one 30 round magazine. Made by Inland - Inland Manufacturing Division of GM January 1945 7234883. Great condition as is was made at the end of WWII. Comes with flash hidder. Push Safety. Condition 9/10.
C..
Springfield Armoury M1 Carbine made by SGGR (SG) - Saginaw Steering Gear (Grand Rapids) May 1943. Serial 3632433 with no magazine. Very rareas SG only made and good condition as is was made at the end of WWII. Comes with flash hidder. Lever safety. Condition 8/10.
Carbine, Caliber ...
Tanfoglio "LS" MINOR RECOIL SPRING Light (104AA) 11.83 lb (5.37 KG) for 9mm Extreme
L=121.3mm (for barrel length 121-153mm) FOR USE IN STOCK II XTREME..
Tanfoglio "LS" MINOR RECOIL SPRING (56AA) 8.72 lb (4 KG) for 9mm Extreme
L=120mm (for barrel length 121-153mm)
When used in a 113mm barrel the equivalent weight is 10.04 LB (4.5KG)..
Tanfoglio Factory Spring and Pin Kit: A must have if you are going to take apart your Tanfoglio. Dont forget to order your Pin Punch Set too.
SPIRNGS: All Sprigs except Recoil Sping
Mainspring
Trigger Spring
Sear Spring
Extractor Spring
Mag Catch Spring
Slide Stop Spri..
Tanfoglio High Capacity Magazine Follower and Spring for Large Frame Mags Only. For 9mm or 40SW Limited Magazines or other Large Frame Magazines. Adds 2 extra rounds to magazine. Price for one set.
Available in Green, Purple and Gold
..
Wolff Gunsprings offers and Extra Power Hammer Spring perfect for enhancing your AR-15/LR-308.
For Use in the Kriss DMK when needing extra hammer power like with the Jard J72 17WSM Upper Receiver. Increased hammer preseure from 3 to 5,5lbs.
Wolff EXTRA-POWER HAMMER SPRING For A & M Series -
..
PRODUCT DESCRIPTION
The TTI Benelli Ultimate Reduced-Power Buffer Spring is designed for
fast follow-up shots and double-taps with reduced-power slugs, buckshot, and
birdshot.
It also cycles full-power ammunition reliable.
TTI Benelli Ultimate Reduced Power Buffer Spring
w/ free Tr..
PRODUCT DESCRIPTION
The TTI Benelli Ultimate Reduced-Power Hammer Spring drops in to reduce the trigger-pull weight of your Benelli M1 M2 M4 Beretta Shotgun and still get detonation with all factory ammunition...
PRODUCT DESCRIPTION
TTI Trigger Guard C-Clip is made from chrome silicon heat treated wire for maximum strength.
This is a part that can get lost very easily and render your shotgun inert until replaced.
A must-have for three-gunners and custom shops...
ZEV Recoil Spring 14lbs RED(9mm, 40, 45)
14lb replacement recoil spring for 40cal / 45ACP Glock
Our high quality round wire recoil springs are color coded for easy identification. No more counting coils or guessing if you have the correct spring.
The red spring is 14 lbs and is ideal for ho..
STI 2011 .40/10mm 126/140mm Magazine Spring
Complete, high-quality components to rebuild your damaged magazines so they work just like new. All springs are tempered music wire, and fit STI bodies without trimming. Original STI OEM spring...
STI 2011 9mm/38 Super 126/140mm Magazine Spring
Complete, high-quality components to rebuild your damaged magazines so they work just like new. All springs are tempered music wire, and fit STI bodies without trimming. Original STI OEM spring...
STI 2011 9mm/38 Super 170mm Magazine Spring
Complete, high-quality components to rebuild your damaged magazines so they work just like new. All springs are tempered music wire, and fit STI bodies without trimming. Original STI OEM spring...
Patriot Defense | Tanfoglio Hybrid Recoil Spring 10LB BLUE
Patriot Defense | Tanfoglio Hybrid Stainless Steel Recoil Spring
This is the flagship of recoil springs for the Tanfoglio line of pistols. We've done the design and engineering to get rid of the multiple lengths and have come up with ..
Patriot Defense | Tanfoglio Hybrid Recoil Spring 11LB BLACK
Patriot Defense | Tanfoglio Hybrid Stainless Steel Recoil Spring
This is the flagship of recoil springs for the Tanfoglio line of pistols. We've done the design and engineering to get rid of the multiple lengths and have come up with..
Patriot Defense | Tanfoglio Hybrid Recoil Spring 8LB RED
Patriot Defense | Tanfoglio Hybrid Stainless Steel Recoil Spring
This is the flagship of recoil springs for the Tanfoglio line of pistols. We've done the design and engineering to get rid of the multiple lengths and have come up with th..
Patriot Defense | Tanfoglio Hybrid Recoil Spring 9LB WHITE
Patriot Defense | Tanfoglio Hybrid Stainless Steel Recoil Spring
This is the flagship of recoil springs for the Tanfoglio line of pistols. We've done the design and engineering to get rid of the multiple lengths and have come up with ..
Patriot Defense | Tanfoglio Optimized Firing Pin Spring
The Patriot Defense Tanfoglio Optimized Firing Pin Spring was engineered from the ground up to work in your Current EAA Witness and Tanfoglio pistol. These are precision made from premium grade music wire offering extended life and quality c..
Patriot Defense | Tanfoglio/CZ Extra Power Extractor Spring
The Patriot Defense Optimized Trigger Return Spring – Reduced Power was engineered from the ground up to work in your current EAA Witness, Tanfoglio, and CZ-USA 75 Series pistol. These are precision made from premium grade rocket wire o..
Patriot Defense | Tanfoglio/CZ Reduced Power Sear Spring
The Patriot Defense Optimized Sear Spring – Reduced Power was engineered from the ground up to work in your current EAA Witness Tanfoglio, IFG Defiant Tanfoglio, IWI Jericho, and CZ-USA 75 series pistol. These are precision made from premi..
Patriot Defense | Tanfoglio Trigger Return Spring - Reduced Power
The Patriot Defense Optimized Trigger Return Spring – Reduced Power was engineered from the ground up to work in your current EAA Witness, Tanfoglio, and CZ-USA 75 Series pistol. These are precision made from premium grade rocket w..
TONISYSTEMS BENELLI/BREDA MAGAZINE TUBE EXTENSION 12 GAUGE +1 with SPRING.
These are supplied with each new Breda shotgun and is the complete kit with the $139,95 Extension Tube with Barrel Nut and the heavy duty extension spring $24.95. Your factory spring will not provide adequate tension for ..
Ghost Progressive Recoil Springs
These are specially twisted to provide a progressive spring application available for 2011/1911 in 8lb, 9lb, 10lb, 11lb, 12lb, 13lb, 14lb.
They come in a pack of 2...
Ghost Progressive Recoil Springs for CZ/Tanfoglio
These are specially twisted to provide a progressive spring application available for CZ/Tanfglio 9lb, 10lb, 11lb, 12lb, 13lb, 14lb.
They come in a pack of 2...
GLOCK RECOIL SPRING 02 G17 DUAL ASSY MARKED 0-2-4
ITEM NUMBER: 8284
GLO-8284 Product description
Recoil Spring Fits M/17 GEN4 only.
Part number 16 on the Glock Schematic.
Marked 0-2-4 on the rear.
..
JARD Howa Trigger System Mini 6-9 oz spring #1059 included.
Description
The JARD trigger system provides adjustability unfound in the factory triggers, as well as a noticeably smoother trigger pull and crisp break. Available in 3 pull weight ranges: 6-9 oz. (dependent on adjustment and se..
JARD Remington 700 Match Grade-Three Lever Trigger Assembly BLK 4oz and 7oz springs #1128 included.
Description
The JARD Remington 700 Match Grade-Three Lever Trigger Assembly features adjustable over-travel and sear engagement.
All assemblies are drop in, requiring no gunsmithing t..
JARD Ruger American Centerfire Trigger System 8oz and 16oz spring # 1128 included)
Description
The JARD Ruger® American Trigger System brings JARD’s exceptional trigger performance to the Ruger® American platform. Experience the smooth pull and crisp break of a JARD trigger. Available ..
JARD Ruger Precision Rifle Trigger System (Centerfire & Rimfire 8oz & 16oz spring #1128 included)
Description
The JARD Ruger® Precision Rifle Trigger System provides a smooth pull and crisp break that simply outclasses the original factory trigger. The safety, sear engagement, and overtra..
JARD Trigger System for Tikka Rifles T3X 16-20ox spring (1059.) Other springs avaolable see manual.
Description
JARD is proud to offer a quality aftermarket trigger option for Tikka rifles. This trigger upgrade offers a nice light pull weight complimented by a crisp break, providing a pre..
J Kenny Spare Lifter Spring (fits all Auto-Loading Lifters)
This is a Spare Torsion Spring for the J Kenny & co. Auto Loading Lifter. It is a custom made, high-carbon steel spring built for maximum performance and perfect reliability.
If you lose your original spring, order this replacement p..
STI 1911 Magwell, Slim with Mainspring Housing
Product Description
Description: STI 1911 Magwell, Slim with Mainspring Housing. STI builds some of the finest handguns in the world. And, they offer a selection of those same custom quality gun parts and accessories so you can best modify or buil..
STI 1911 Magwell, Standard Width with Mainspring Housingg
Product Description
Description: STI 1911 Magwell, Standard Government Width with Mainspring Housing. STI builds some of the finest handguns in the world. And, they offer a selection of those same custom quality gun parts and accessorie..
STI 1911/2011 Sear Spring 800-036-00
Product Description
Description: STI 1911/2011 Sear Spring. STI builds some of the finest handguns in the world. And, they offer a selection of those same custom quality gun parts and accessories so you can best modify or build the gun of your dreams.
..
STI 1911/2011 Barrel Link Pin 825-033-00
Product Description
Description: STI Barrel Link Pin Set. STI builds some of the finest handguns in the world. And, they offer a selection of those same custom quality gun parts and accessories so you can best modify or build the gun of your dreams.
..
DPM MECHANICAL RECOIL REDUCTION SYSTEM - SPRINGFIELD XD(M) BARREL 4.5" & 5.25" 9MM-40S&W\
Item:
The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun. This system works due to the multi spring intric..
DPM MECHANICAL RECOIL REDUCTION SYSTEM - TANFOGLIO LIMITED CUSTOM-STOCK-STOCKII BUZZ CUSTOM
Item:
The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun. This system works due to the multi spring intricate ..
DPM MECHANICAL RECOIL REDUCTION SYSTEM - TANFOGLIO LIMITED-LIMITED PRO-STOCKIII-MATCH-P19L-CUSTOM
Item:
The Mechanical Recoil Rod Reducer System is a direct replacement for the stock recoil rod and does not change the configuration of the gun. This system works due to the multi spring intr..
King Competition MSHG5-S30-KIT spring kit (14 springs)
Train a lot and want the crispy feeling of new springs? If you wish to replace the springs of your shell holder, you can can easily screw out the main bolt and change the springs. No other disassembly required...
King Competition MSHG5-S30-KIT spring kit (6 springs)
Train a lot and want the crispy feeling of new springs? If you wish to replace the springs of your shell holder, you can can easily screw out the main bolt and change the springs. No other disassembly required...
KIDD Recoil Spring Replacements Heavier-Red
Description:
heavier recoil spring (red)
Intended to be used with our guide rod as a replacement spring. The heavier spring will work with higher velocity 22lr ammo.
Packaging includes:
one spring..
KIDD Recoil Spring Replacements Light-Green
Description:
lighter recoil spring (green)
Intended to be used with our guide rod as a replacement spring. The lighter spring will work with subsonic velocity 22lr ammo.
Packaging includes:
one spring..
KIDD Recoil Spring Replacements Standard-White
Description:
standard recoil spring (white)
Intended to be used with our guide rod as a replacement spring. The standard spring will work with almost all 22lr ammo.
Packaging includes:
one spring..