Brand: LUTH-AR
Model: Luth MBA-3 Stock Assembly - Black
Luth MBA-3 Carbine Buttstock – Black
The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-o..
$299.00
Ex Tax:$260.00
Brand: LUTH-AR
Model: Luth MBA-3F Stock Assembly - FDE
Luth MBA-3F Carbine Buttstock – FDE
The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-3 is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-3 features a 3-Axis Buttplate with Length-of..
$299.00
Ex Tax:$260.00
Brand: LUTH-AR
Model: Luth MBA-4 Carbine w/Cheek Rest
Luth MBA-4 Carbine w/Cheek Rest – Black
The Luth-AR Modular Buttstock Assembly (MBA) for AR style carbines is designed to replace the standard buttstock on your AR. The MBA-4 is designed to work with a 6-position Mil-Spec or Commercial buffer tube. The MBA-4 is a direct replacement a standard adj..
$239.95
Ex Tax:$208.65
Brand: LUTH-AR
Model: Luth MBA-5 Buttstock – Black
Luth MBA-5 Buttstock – Black
The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the inte..
$99.95
Ex Tax:$86.91
Brand: LUTH-AR
Model: Luth MBA-5F Buttstock – FDE
Luth MBA-5F Buttstock – FDE
The Luth-AR MBA-5 Buttstock is the latest in the MBA Series. Designed as an affordable, lightweight, adjustable carbine buttstock with a paddle-style adjustment lever allowing rapid positioning. The wide flared cheek rest provides a comfortable cheek weld and the integ..
$99.95
Ex Tax:$86.91
Pre-Order
Brand: LUTH-AR
Model: Luth MCA™-22 Modular Chassis Assembly
Luth MCA™-22 Modular Chassis Assembly
Designed for Ruger® 10/22® and similar actions and barrels.
The MCA™-22 allows users the best possible fit for recreational, hunting, and competition shooting. Easily install your Ruger® 10/22® or similar receiver, trigger group and barrel into the MCA..
$259.95
Ex Tax:$226.04
Brand: LUTH-AR
Model: Luth The Chubby Grip® - FDE
Luth The Chubby Grip® – FDE
The Chubby Grip® is designed with shooter ergonomics in mind. The full palm swell fills the hand, providing a consistent and rapid grip, properly positioned to promote accurate and repeatable shots on target. The thumb rest and palm shelf work together to lock the hand..
$46.95
Ex Tax:$40.83
Model: Alpha Factory ModShot Rear Stock Butt Plate
Alpha Factory ModShot Rear Stock Butt Platep Carbon 3D Printed for Gunsnz Ltd.
This 2 part design adds confort and a linger trigger pull to the ModShot Speed Steel Stock.
These are 3D Laser Printed and all you need to do is unscrew the plate and put these in place as they are pressure fit and..
$69.95
Ex Tax:$60.83
Model: Alpha Factory RUGER 10/22 Double Mag Base Extension
Alpha Factory RUGER 10/22 Double Mag Base Extension.
For all Ruger RUGER 10/22 22LR Magazines. This double extension makes it easy to put two magazines together to assist with load and unload your RUGER10/22 magazine for use in any RUGER/TACSOL/VOLQUARTSEN 10/22 rIfle and especially for Speed St..
$20.00
Ex Tax:$17.39
Model: Alpha Factory 10/22 Mag Base Extension
Alpha Factory RUGER 10/22 3D Carbon Laser Printed Mag Base Extension.
For all Ruger RUGER 10/22 22LR Magazines. This extension makes it easy to load and unload your RUGER10/22 magazine for use in any RUGER/TACSOL/VOLQUARTSEN 10/22 rIfle and especially for Speed Steel and Competition Shooting.
..
$20.00
Ex Tax:$17.39
Model: Alpha Factory RUGER 22Magnum/17HMR Mag Base Extension
Alpha Factory RUGER 22Magnum/17HMR Mag Base Extension
For all Ruger 22Magnum/17HMR Magazines. This extension makes it easy to load and unload your magazine for use in any Ruger 22Magnum/17HMR rifle. Magazine and especially for Speed Steel and Competition Shooting.
These are a snug fit so you..
$23.00
Ex Tax:$20.00
Model: Alpha Factory Vertical Full Grip Carbon 3D Printed
Alpha Factory Vertical Full Grip Carbon 3D Printed for Gunsnz Ltd.
For all ModShot or AR/Chassis applications like the MPA or MDT Chassis where you want a vertical grip.
These are 3D Laser Printed with a Vertical Full Grip with a little finger stabilization area. These are the best grip we ha..
$69.95
Ex Tax:$60.83
Showing 1 to 12 of 12 (1 Pages)